ユーザーズガイド DENON DL-S1

[. . . ] (1) Operating instructions 1 (2) Connecting cable (approx. 3m) 2 (3) Denon service network 1 SPECIFICATIONS : 2-way, 2-speakers (DL-S1) 3-way, 4-speakers (USC-M50) Low-leakage-flux Speakers : (DL-S1) 12cm cone bass-mid 1 2. 5cm dome high range 1 (USC-M50) 12cm cone bass-mid 2 2. 5cm dome high range 1 2cm dome high range 1 Input impedance: 6 Ω/ohms Type : 100 watts (IEC) : 55 Hz 30 kHz (DL-S1) 45 Hz 60 kHz (USC-M50) Sensitivity : 88 dB (1m 1watt) (DL-S1) 90 dB (1m 1watt) (USC-M50) Crossover frequency : 4 kHz Dimensions: 162(W) 270(H) 240(D)mm (DL-S1) 176(W) 305(H) 240(D)mm (USC-M50) Weight : 3. 4 kg (one unit) (DL-S1) 5. 2 kg (one unit) (USC-M50) Max. input Frequency range For improvement purposes, specifications and design are subject to change without notice. CAUTIONS ON HANDLE Avoid placing the speaker systems in places exposed to direct sunlight for long periods of time or near heaters or other heating equipment. [. . . ] input Frequency range For improvement purposes, specifications and design are subject to change without notice. CAUTIONS ON HANDLE Avoid placing the speaker systems in places exposed to direct sunlight for long periods of time or near heaters or other heating equipment. Placing in humid or dusty places may result in damage. Exposing the cabinet to insecticides or wiping it with benzene, thinner or other solvents may result in damage or discoloration to the finish. Use a soft cloth or silicone cloth to wipe any dirt off the cabinet. Use cloths containing chemical substances with care. Do not apply inputs exceeding the speaker system's max. input (the input which can be applied a short period of time with regular program sources). If this happens, turn off the TV's power, wait 15 to 30 minutes, and turn the power back on. The TV's self demagnetizing circuit will improve the picture. If the colors are still blotchy, move the speaker systems further away from the TV. Also note that if there is a magnet or any device generating magnetic force nearby, interaction between this device and the speaker systems can cause the colors on the TV to become blotchy. REMOVING THE SPEAKER NET The net on the front of the speaker system is detachable. To remove it, grasp it on both sides and pull it towards you. To attach the net, line up the plastic pieces holes out of the net with the sticking in the cabinet and press in. < > CONNECTIONS Be sure to turn the amplifier's power off when connecting the speaker systems. Use the included cables to connect the input terminals on the back of the speaker systems (see diagram) to the amplifier's speaker output terminals. [. . . ] To remove it, grasp it on both sides and pull it towards you. To attach the net, line up the plastic pieces holes out of the net with the sticking in the cabinet and press in. < > CONNECTIONS Be sure to turn the amplifier's power off when connecting the speaker systems. Use the included cables to connect the input terminals on the back of the speaker systems (see diagram) to the amplifier's speaker output terminals. [. . . ]