ユーザーズガイド PANASONIC RQ-V65

[. . . ] Playback, radio reception or recording is interrupted while the unit is in use. Both the main unit and the remote control have this function, but each works independently. To use this function, set [HOLD] to the on position (hold mode). Before using the buttons, be sure to set [HOLD] to the off position. 2 3 RQTT0399 A V W RQTT0399 Operating Instructions Power Sources (See :-<. ) Selecting reverse mode (from the main unit only) Press [PRESET/TAPE MODE] and then press [RADIO ON/BAND, b/l ]. [. . . ] “ ”!#“ ” : Both the forward and the reverse sides are played once. : One side is played. Presetting stations You can store each station separately as follows. (Total: 30 stations) AM 1-10 FM 1-10 TV 1-10 1. Press [PRESET/TAPE MODE] and then press and hold one of memory buttons ([1], [2], [3], [4], [5]). To select a memory channel from 6 to 10 Press [PRESET/TAPE MODE] twice and then press and hold one of memory buttons ([1], [2], [3], [4], [5]). To recall a preset station Press [PRESET/TAPE MODE] and then press one of memory buttons ([1], [2], [3], [4], [5]). To select 6 to 10, press [PRESET/TAPE MODE] twice and then press one of memory buttons ([1], [2], [3], [4], [5]). From remote control, press [i] or [j] to change in sequence. Recording Recording from the stereo microphone (See pages H-I. ) : Both sides record (Forward#Reverse) : One side only records. Tape mode “ X2 ”:Long play (Doubles the recording time, e. tape. ) “ ” (no display):Normal recording Use the same mode when playing the tape. Tape Operation Listening to a tape (See >-?. ) To change tape direction From the main unit, press [TAPE/21, X2 ] during playback. While the setting is displayed, press [PRESET/TAPE MODE] for more than 5 seconds. Changing allocation settings erases the stations stored in the memory. Radio Operation Listening to the radio (See B-C. ) To listen to a tape recorded with Dolby B NR (from the main unit only) Press [PRESET/TAPE MODE] and then press [j/REW, ÎNR] during playback to display “ÎNR”. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. To obtain better reception AM:Try various directions to obtain optimum reception. Selecting FM monaural (See D. ) Set [FM MODE/B. P. ] to [MONO]. This will reduce noise and provide clear reception, but the broadcast will not be heard in stereo. RQTT0399 Quick skip Skip about 10 seconds, backward and forward. From the main unit, press and hold [i/FF, 1 REP] or [j/REW, ÎNR] during playback. From the remote control, press and hold [ i ] (forward) or [ j ] (backward) during playback. X Y RQTT0399 Operating Instructions Record time counter (from remote control only) Press [ , REC TIME-SOUND] during recording. Displayed in 1 minute units from 0 to 239. To change the display, press [ , REC TIME-SOUND]. [. . . ] Alternately displays the counter and either “MIC”, when recording with the microphone, or the frequency of the station being recorded. To reset the counter, press and hold [ , REC TIME-SOUND]. To temporarily stop the recording From the main unit, slide [REC, REC PAUSE] during recording. From the remote control, press [REC] during recording. To resume the recording, do the same as above. Monitoring The sound being recorded can be monitored through the stereo earphones. [. . . ]