ユーザーズガイド ROLAND HP-3000S

[. . . ] Avoid using or storing the unit in dusty or humid areas, or areas that are subject to high levels of vibration. For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. [. . . ] For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a mild, nonabrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth. Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation. Do not allow objects or liquids of any kind to penetrate the unit. Return the position of the pedal to its highest position, and set the minimum volume by using the Minimum Volume Knob on the FV50H. (The Minimum Volume Knob does not affect the maximum volume. ) 4. Now you can control the volume by using the pedal within the range between the maximum and the minimum volume you have set. HOW TO USE THE TUNER OUT JACK Connect the output of the guitar to the Input Jack 1 on the HP-3000S, then connect the Tuner Out to the input jack on the tuner. (The signal of the Input 2 is not sent out from the Tuner Out. ) Then return the pedal to its highest position, and tune the instruments. In this way, there is no sound coming from the amplifier. [. . . ] (The signal of the Input 2 is not sent out from the Tuner Out. ) Then return the pedal to its highest position, and tune the instruments. In this way, there is no sound coming from the amplifier. [. . . ]