ユーザーズガイド ROLAND OP-C30DP01

[. . . ] • • • • • OP-C30DP01 OP-C30DP02 1. 3. 4. 2. © OP-C30DP 40785256 2PD Replacing the decorative panels • Do not apply excessive force to any part. [. . . ] OP-C30DP01 Top Away from yourself Top (Outer side) Toward yourself Away from yourself (Outer side) Toward yourself Top Away from yourself Away from yourself Top Toward yourself OP-C30DP02 Top Away from yourself Bottom Bottom Bottom Bottom Bottom Procedure * If the main unit is already attached to the stand, you’ll need to separate the main unit from the stand. After you replace the decorative panel, place the main unit back on the stand and tighten the knob bolts. Stopper 1. Bend the decorative panel so that the stopper attached to it is freed from the bracket, and pull the decorative panel upward and out of the side board. Stopper 3. With the decorative panel positioned so that its shiny side (outer surface) is facing outward, slide it into the grooves of the side board and gently lower it into position. When the stopper attached to the decorative panel contacts the bracket, press the stopper downward to push the decorative panel into place. Bracket 2. Remove the stopper from the decorative panel, and attach it to the other decorative panel that you’ll be installing. [. . . ] No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. OP-C30DP 40785256 2PD [. . . ]