ユーザーズガイド ROLAND RE-100

[. . . ] Please read this in conjunction with the owner's manual. Page 44 “Saving or Loading Songs or Settings” Copying the sound settings (registration) in units of individual memory banks Sound settings (registration) stored in the RE-100's internal memory, on USB memory, or in the factory-set can be copied into internal memory in units of individual memory banks. 1. [. . . ] 45 of the owner's manual. ) In this case, choose a number that indicates (Empty). 7. Turn the [Select/Menu] knob to select the “Copy from, ” and turn the [Value/Exit Menu] knob to select “USB. ” Setting Explanation Copy a memory bank from the factoryset Copy a memory bank from a current internal settings Copy a memory bank from USB memory 2. To the USB connector, connect the USB memory that contains the memory bank you want to load. FACTORY INTERNAL USB 3. From the main screen, press the [Select/Menu] knob. fig. D-Save-1. eps 8. When you copy the Memory Bank from USB memory, the internal Bank will be deleted. 6. Turn the [Select/Menu] knob to select “Copy General Piston, “ and press the [Select/Menu] knob. The “Copy General Piston” screen will appear. If you decide to cancel, press the [Value/Exit Menu] knob. 12. Press the [SET] piston; the sound settings of the specified bank will be copied. Copyright © 2009 ROLAND CORPORATION All rights reserved. [. . . ] Press the [SET] piston; the sound settings of the specified bank will be copied. Copyright © 2009 ROLAND CORPORATION All rights reserved. [. . . ]