ユーザーズガイド RYOBI EBC1040-2 SCHEMA

[. . . ] Otherwise, the battery may not fully charge.  Take the headphones off before charging.  When unplugging the headphones, hold the cord by the plug. Do not pull on the cord or it may break. [. . . ] (S, M, L)  USB charge adaptor supplied. How to install the earbuds correctly (see fig. ) If the earbuds do not fit your ears correctly, the noise canceling effect will not be optimal. To optimize noise canceling and to enjoy better sound quality, change the earbuds to another size, or adjust the earbud position to fit your ears comfortably and snugly. If the earbuds do not fit your ears, try another size. Confirm the size of the earbuds by checking colour inside (see fig. If you change the earbuds, install them firmly on the headphones to prevent the earbud from detaching and remaining in your ear. How to attach the clip to the cord (see fig. ) 1 Hold the clip closed, and pull up the lever on the 2 clip just a little. Put the cord into the groove under the lever. Notes Muffled sound  Turn down the volume of the connected AV equipment.  Recharge the headphones. The headphones do not operate properly.  The headphones cannot be turned on while charging. Unplug the headphones from the USB charge adaptor to operate. If the power does not turn on, even after charging the headphones, the rechargeable battery may be damaged. Not doing so may cause early deterioration.  Do not use the headphones when use of electronic equipment is prohibited or when use of personal headphones for in-flight music services is prohibited.  Take the headphones off when not in use. Note on static electricity In particularly dry air conditions, noise or sound skipping may occur, or mild tingling may be felt on your ears. This is a result of static electricity accumulated in the body, and not a malfunction of the headphones. The effect can be minimized by wearing clothes made from natural materials. If you have any questions or problems concerning the system that are not covered in this manual, please consult your nearest Sony dealer. Charge the headphones first How to use the carrying case (see fig. ) Bundle the cord before storing the headphones in the carrying case.   Sectional View Coloured parts Pressure-relieving urethane cushion  The headphones contain a rechargeable nickel-metal hydride battery. Because the battery was included in the package at the time of manufacture (as a convenience to the user), the remaining battery charge may be somewhat depleted by the time of purchase. For the recharging procedure, see “Charging the headphones”. Beep and indicator status Beep from the headphones — battery status Status Full  Low Empty Location and Function of Parts (see fig. ) Headphones  Microphones  Earbuds  Power indicator (red) Beep 3 times*1 2 times*1 1 time*1 1 long beep (2 seconds)*2 Listening to music (see fig. ) 1 2 Connect the headphones to the AV equipment. Wear the earpiece marked  in your right ear and the one marked  ( has a tactile dot for easy recognition) in your left ear. [. . . ]  When you use the headphones in a train or a car, noise may occur depending on street conditions.  Mobile phones may cause interference and noise. Should this occur, locate the headphones further away from the mobile phone.  General charging and usage time Depending on the remaining battery status of the headphones, the supplied USB charge adaptor requires approx. 15 minutes to 4 hours to recharge. Approx. [. . . ]