ユーザーズガイド SHARP MD-DS30

[. . . ] Places with strong magnetic fields such as TVs or loudspeakers. Places where sand can easily enter the inside of the unit (beaches etc. ). If the unit is used near radio tuners or TVs, noise and/ or picture interference may result. If you experience these problems, move the unit away from such devices. [. . . ] 3) Press the or button repeatedly to select bass, mid-range or treble. 4) Press the volume button repeatedly to adjust the level. 5) Repeat steps 3) and 4) to select the level. 6) Press the SOUND button to save the setting. To stop playback: Press the button during playback. In about 2 minutes after playback is stopped or paused and left as it is, the unit will be automatically turned off. To turn off the power: Press the button while playback is stopped. HOLD FUNCTION (page 20) To avoid operations by accidentally pressing the buttons, use the hold function. Main Unit: Hold down the :OFF-HOLD button for 2 seconds or more. (You will hear one beep. ) Then "HOLD on" will appear on the remote control. To cancel the hold mode, press the :OFF-HOLD button for 2 seconds or more. (You will hear two beeps. ) Then "HOLD off" will appear on the remote control. Repeat steps 1) to 6) to set “EQ-USER2”. MD-DS30 Remote Control Unit: To put the unit in the malfunction prevention state, move the HOLD switch in the direction of the arrow. To cancel the hold mode, return the HOLD switch to its original position. Note: Intro play cannot be operated with the the main unit. button on TRACK SEARCH (page 21) To move to the beginning of the next track : During playback, press the button once. RANDOM OR REPEAT PLAYBACK (pages 22 - 23) Press the MODE button on the remote control repeatedly to select the playback mode during playback. To fast-forward audibly (Cue): During playback, hold down the button. Playback will start when you release the button. To move to the beginning of the current track: During playback, press the button once. No display After all tracks are played back at random, playback stops automatically. (You cannot select the playback order. ) Random play is repeated. All tracks are played back repeatedly in order. The selected track is played back repeatedly. All tracks registered as "favorite tracks" ( ) are played in order and playback stops. All favorite tracks are played back repea( ) tedly. Playback stops after all tracks are played No display in order. To fast-reverse audibly (Review): During playback, hold down the button. Playback will start when you release the button. To start playback with a desired track: 1. While in the stop mode, press the or button on the remote control. The selected track will be played back. INTRO PLAY (page 21) This function plays the first 9 seconds of each track. Press the MODE button on the remote control to enter the normal playback or all track repeat playback mode. While in the stop mode, hold down the button on the remote control for 2 seconds or more. * * ( ) MY, MY , are displayed only when the favorite tracks are registered on MiniDisc. * ENGLISH OPERATION MANUAL 3. [. . . ] Align the protuberances on the battery case with the indentations on the side of the unit. Turn the fixing screw on the battery case toward the word “LOCK”, and then make sure that the battery case does not move. G When using this portable MD with an alkaline battery, keep the rechargeable battery in the main unit. G Do not insert a rechargeable battery (such as nickelcadmium rechargeable battery) into the battery case. “LIGHTnor” Display on the remote control Indicated. [. . . ]