ユーザーズガイド SHARP MD-ST770

[. . . ] When battery charging is completed, the operation indicator will go out. To interrupt playback: Move the M button toward on the remote control during playback. q Move the M button toward again to start playback. To stop playback: Move the M button toward on the remote control during playback. In about 2 minutes after playback is stopped or paused and left as it is, the unit will automatically turn the power off. To turn off the power: Move the M button toward on the remote control while the playback is stopped. If you stop and restart playback without removing the MiniDisc, the playback will start from where it was stopped. [. . . ] Press the MODE-DISP button on the remote control for 1 second or more. q Once the total playback time is displayed, you can check the total playback time of other tracks simply by selecting them with the M button on the remote control. s To check the elapsed playing time and remaining playing time Track number and track name q Each s Intro scan You can listen to the first 5 seconds of each track. Keep moving the M button toward for 2 seconds or more on the remote control. Press the MODE-DISP button on the remote control for 1 second or more during playback. Elapsed playing time Remaining playing time To return to normal playback: Move the M s Random play and repeat play button toward again on the remote control. During playback, press the MODE-DISP button on the remote control repeatedly to select the play mode. Playback in random order Repetition of random order Repetition of all tracks Repetition of a single track No display Playback in order s To check service life of the battery time the MODE-DISP button on the remote control is pressed for 1 second or more, the display of the second line changes. When a rechargeable battery or the alkaline battery is used, its remaining amount is displayed. As the battery charge drops from use, the bars in the charge indicator will go out one by one. q When the battery is run down, “LoBATT” appears on the display and the power is turned off. q The battery remaining amount may not be displayed steadily until approximately 20 seconds after the power is turned on. q The remaining amount is not displayed if the unit is used on the battery charger. q The number of bars shown in the battery indicator may change depending on the operation being performed. q If you use a battery which you stopped charging halfway, “ ” may appear. It does not mean that the battery is completely charged. MD-ST770 LISTENING TO A GROUP-RECORDED MINIDISC (pages 24 - 27) Using MiniDiscs group-recorded with a recorder that can perform group recording (Sharp's MD studio, MD portable recorder, etc. ), you can select the group of your favorite album or artist and play it back. Group1 1 To select the desired track: Move the M button toward or on the remote control. s Canceling the group mode While playback is stopped, press the button on the remote control for 1 second or more. The group indicator will go out. Group2 4 1 2 Non-group 1 2 Group3 5 1 2 A B 2 3 C D E F G H 3 I 3 J 4 K L M N s Various playback modes In the group mode, press the MODE-DISP button on the remote control repeatedly to select the desired playback mode. 1 s When playing in the group mode Group1 1 Group2 Group3 4 1 2 Non-group 1 2 A B 2 3 C D E F G M N H 3 1 2 I 3 J 4 K L 5 Non-group tracks are played at the end. s When playing after canceling the group mode Group1 1 Group2 4 1 2 Non-group 1 2 Group3 5 1 2 A B 2 3 C D E F G H 3 I 3 J 4 K L M N Tracks are played back in the order they were recorded regardless of the group. Random play of tracks in every group. When all groups have ended, playback stops automatically. Tracks are played at random within a group. Repeat play of all groups in the order they were recorded. Repeat play of a group. s Listening to a group-recorded MD To playback: Load a group-recorded MD. q If the auto play mode has been canceled, move the M button . toward q Playback stops automatically when the last track in the last group has ended. s Checking the total playback time q Press the button in the stop mode. Within 5 seconds, or on the remote control to move the M button toward select the group. q Once the total playback time is displayed, you can check the total playback time of other groups simply by selecting them with the M button on the remote control. To stop playback: Move the M button toward on the remote control. q If you play the MD after removing it, playback starts from the first track in the group 1. To select the desired group: 1. [. . . ] Press the M button on the remote control again. Move the M button toward press the M button on the remote control. Move the M button toward or to select the items and press the M button on the remote control. Menu Beep sound Auto play Auto power save Operation indicator Backlight on the remote control Display on the remote control Item YES See below. NO USEFUL FEATURES (pages 29-32) s Using with the AC adaptor 1. [. . . ]