ユーザーズガイド AIRLIVE WL-5470AP QUICK SETUP GUIDE

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 2 3 4 5 6 7 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. Water warning • Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. If any liquid such as water seeps into the device, turn off the power immediately and unplug the power cord from the AC outlet. Parameter Address 3Eh (00111110b) 10h (00010000b) aah (0aaaaaaab) aah (0aaaaaaab) Parameter ddh (0dddddddb) Data Value ddh (0dddddddb) ddh (0dddddddb) ddh (0dddddddb) ddh (0dddddddb) EOX F7h (11110111b) bit0 bit1 bit2 bit3 bit4 bit5 bit6 bit7 bit8 bit9 bit10 bit11 bit12 bit13 bit14 bit15 bit16 bit17 bit18 bit19 bit20 bit21 bit22 bit23 bit24 bit25 bit26 bit27 bit28 bit29 bit30 bit31 data 0 data 1 data 2 data 3 data 4 0 0 0 0 0 3 E 8 data 1 = 00h data 2 = 00h data 3 = 07h data 4 = 68h F F F F F C 1 8 data 1 = 7Fh data 2 = 7Fh data 3 = 78h data 4 = 18h 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 1 0 0 0 data 0 = 00h 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 1 1 0 0 0 data 0 = 1Fh 40 AIRLIVE [Digital Mixing Engine Satellite] Model DME8i-C, DME8o-C, DME4io-C MIDI Implementation Chart Function. . . Basic Channel Default Changed Default Messages Altered Transmitted 1 - 16 1 - 16 ˛ ˛ Date :16-FEB-2006 Version : 1. 0 Remarks Memorized Recognized 1 - 16 1 - 16 ˛ ˛ ˛ ˛ ˛ ˛ ˛ ˛ ˛ ˛ Mode ************** ˛ Note Number : True voice Velocity ************** Note ON ˛ Note OFF ˛ Key's Ch's ˛ ˛ ˛ Ø Ø After Touch Pitch Bend 0, 32 1-31, 33-95, 102-119 Control Change *1 *2 Ø Ø *1 *2 Bank Select Assignable Prog Change Ø : True # 0 - 127 *1 ************** *3 Ø 0 - 127 0 - 127 *1 System Exclusive Ø Ø ˛ ˛ ˛ ˛ ˛ ˛ ˛ ˛ ˛ Ø ˛ *3 Assignable Common : Song Pos. ˛ ˛ : Tune ˛ ˛ ˛ ˛ ˛ ˛ ˛ ˛ System : Clock Real Time : Commands : : : Mes- : sages: : Aux Notes: All Sound Off Reset All Cntrls Local ON/OFF All Notes OFF Active Sense Reset *1 transmit/receive if program change switch is on. *2 transmit/receive if control change switch is on. *3 transmit/receive if parameter change switch is on. MIN TYP MAX 0. 05 0. 015 0. 007 UNITS % % % Hum&Noise <DME8i-C> Input Output RL fs=48kHz or 96kHz, EIN=Equivalent Input Noise CONDITIONS Rs=150Ω, GAIN: –60dB All input & output level controls: 0dB Rs=150Ω, GAIN: +10dB All input & output level controls: 0dB MIN TYP –128 EIN –64 –82 MAX –127 EIN UNITS dBu dBu INPUT 1–8 OUTPUT 1–8 600Ω –79 dBu <DME8o-C> Input INPUT 1–8 Output OUTPUT 1–8 RL 600Ω CONDITIONS Rs=150Ω, GAIN: +10dB All input & output level controls: 0dB MIN TYP –82 MAX –79 UNITS dBu 44 <DME4io-C> Input Output RL CONDITIONS Rs=150Ω, GAIN: –60dB All input & output level controls: 0dB Rs=150Ω, GAIN: +10dB All input & output level controls: 0dB * MIN TYP –128 EIN –64 –82 –79 MAX –127 EIN UNITS dBu dBu dBu INPUT 1–4 OUTPUT 1–4 600Ω Hum & Noise are measured with a 6dB/octave filter @12. 7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation. Dynamic Range <DME8i-C/DME8o-C> Input INPUT 1–8 <DME4io-C> Input INPUT 1–4 * Output OUTPUT 1–4 RL Output OUTPUT 1–8 RL fs=48kHz or 96kHz CONDITIONS GAIN: +10dB MIN TYP 106 MAX UNITS dB 600Ω CONDITIONS GAIN: +10dB MIN TYP 106 MAX UNITS dB 600Ω Dynamic range are measured with a 6dB/octave filter @12. 7kHz; equivalent to a 20kHz filter with infinite dB/octave attenuation. Crosstalk@1kHz <DME8i-C/DME8o-C> from INPUT N <DME4io-C> from INPUT N to to reference to the level of output N CONDITIONS N = 1–8, GAIN: +10dB MIN TYP MAX –80 UNITS dB OUTPUT (N–1) or (N+1) CONDITIONS N = 1–4, GAIN: +10dB MIN TYP MAX –80 UNITS dB OUTPUT (N–1) or (N+1) * Crosstalk is measured with a 18dB/octave filter @80kHz LED Level Meter <DME8i-C> METERING POINT INPUT 1–8 SIGNAL green LED: ON <DME8o-C> METERING POINT OUTPUT 1–8 SIGNAL green LED: ON –40 dBFs CONDITIONS PEAK red LED: ON MIN TYP –3 MAX UNITS dBFs –40 dBFs CONDITIONS PEAK red LED: ON MIN TYP –3 MAX UNITS dBFs 45 <DME4io-C> METERING POINT INPUT 1–4 OUTPUT 1–4 CONDITIONS PEAK red LED:ON SIGNAL green LED:ON MIN TYP –3 –40 MAX UNITS dBFs dBFs Signal Delay PARAMETER CobraNet Latency: 5. 33msec CobraNet Latency: 2. 67msec CobraNet Latency: 1. 33msec ANALOG INPUT to ANALOG OUTPUT@96KHz CONDITIONS MIN TYP 6. 12 3. 45 2. 12 MAX UNITS msec msec msec ANALOG INPUT CHARACTERISTICS Input Terminals GAIN Actual Load Impedance For Use With Nominal Input Level Nominal –60dBu (0. 775mV) +10dBu (2. 45V) Max. before clip –40dBu (7. 75mV) +30dBu (24. 5V) Connector <DME8i-C> CH INPUT 1–8 <DME4io-C> CH INPUT 1–4 –60dB 3kΩ +10dB 50–600Ω Mics & 600Ω Lines EUROBLOCK (5. 08mm pitch) *1. In these specifications, 0dBu is referenced to 0. 775 Vrms. All AD converters are 24-bit linear, 128-times oversampling (Fs=48kHz)/64-times oversampling (Fs=96kHz). [. . . ] All AD converters are 24-bit linear, 128-times oversampling (Fs=48kHz)/64-times oversampling (Fs=96kHz). +48V DC (Phantom power) is supplied to CH INPUT EUROBLOCK connectors via each individual software controlled switch. ANALOG OUTPUT CHARACTERISTICS Output Terminals Actual Source Impedance For Use With Nominal Output level Nominal Max. [. . . ]