ユーザーズガイド B&W VM1

[. . . ] 10 CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 CPU 1-3-1 1-3-2 CPU CPU 1-4 1-4-1 1-4-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1-5 1-6 1-7 1-8 1-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ATI CrossFireX™/NVIDIA SLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] <DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash 03/25/2011-Z68-7A89VG0MC-00 BIOS BIOS - 66 - B. BIOS <Enter> • Save Main BIOS to Drive • Q-Flash • BIOS SATA <End> 2. HDD 1-0 <Enter> Q-Flash Utility v2. 23 Flash Type/Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MXIC 25L3206E 4M 0 file(s) found Keep DMI Data Enable HDD 1-0 Load CMOS Default Enable <Drive> Update BIOS from Drive Save BIOS to Drive Enter : Run ESC:Reset F10:Power Off hi:Move Total size : 0 Free size : 0 BIOS BIOS USB Q-Flash Update BIOS from Drive BIOS USB RAID/AHCI Q-Flash IDE/ POST FAT32/16/12 3. BIOS BIOS <Enter> 2: USB BIOS Are you sure to update BIOS?• • 3: Q-Flash Utility v2. 23 Flash Type/Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MXIC 25L3206E 4M <Enter> / USB BIOS BIOS BIOS Keep DMI Data Enable !! Load CMOS Enable Update BIOS from Drive Please Save pressBIOS any key to continue to Drive Enter : Run ESC:Reset hi:Move F10:Power Off - 67 - 4: <Esc> <Enter> BIOS Q-Flash POST 5: POST <Delete> <Enter> BIOS BIOS BIOS CMOS Setup Utility-Copyright (C) 1984-2011 Award Software       MB Intelligent Tweaker(M. I. T. ) Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PC Health Status Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Load Optimized Defaults (Y/N)?Y Setup Exit Without Saving : Select Item F10: Save & Exit Setup Load Optimized Defaults F11: Save CMOS to BIOS F12: Load CMOS from BIOS BIOS Load Optimized Defaults ESC: Quit F8: Q-Flash <Y> 6: Save & Exit Setup BIOS <Y> CMOS BIOS - 68 - 4-2-2 @BIOS A. 1. @BIOS BIOS BIOS TSR ( ) ) ) B&W G. O. M. @BIOS 1. Update BIOS from B&W Server BIOS @ BIOS BIOS @BIOS BIOS BIOS BIOS : B&W 2. BIOS Web Update BIOS from File BIOS BIOS 3. 4. Save Current BIOS to File BIOS : BIOS BIOS BIOS Load CMOS default after BIOS update BIOS C. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : RAID0(Stripe) Disks : Select Disks Strip Size : 128 MB Capacity : 111. 7 GB Sync : N/A Create Volume WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. [ HELP ] Are you sure you want to create this volume?(Y/N) : Press ENTER to create the specified volume. [hi]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select 6 DISK/VOLUME INFORMATION ( 7) RAID RAID Intel(R) Rapid Storage Technology - Option ROM - 10. 0. 0. 1008 Copyright(C) 2003-10 Intel Corporation. [ MAIN MENU ] 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Recovery Volume Options 5. Exit [ DISK/VOLUME INFORMATION ] RAID Volumes : ID Name 0 Volume0 Level RAID0(Stripe) Strip 128KB Size 223. 6GB Size 111. 7GB 111. 7GB Status Normal Bootable Yes Physical Devices : Port Device Model 0 ST3120026AS 1 ST3120026AS [hi]-Select Serial # 3JT354CP 3JT329JX [ESC]-Exit Type/Status(Vol ID) Member Disk(0) Member Disk(0) [ENTER]-Select Menu 7 RAID BIOS <Esc> MAIN MENU SATA RAID/ACHI 5. Exit SATA RAID/AHCI - 85 - Intel Rapid Recover Technology RAID 1 Rapid Recovery Technology • • • 1: MAIN MENU : RAID 2 RAID Create RAID Volume <Enter> 8 Intel(R) Rapid Storage Technology - Option ROM - 10. 0. 0. 1008 Copyright(C) 2003-10 Intel Corporation. [ MAIN MENU ] 1. Create RAID Volume 2. Delete RAID Volume 3. Reset Disks to Non-RAID 4. Recovery Volume Options 5. Exit [ DISK/VOLUME INFORMATION ] RAID Volumes : None defined. Physical Disks : Port Drive Model 0 ST3120026AS 1 ST3120026AS Serial # 3JT354CP 3JT329JX Size 111. 7GB 111. 7GB Type/Status(Vol ID) Non-RAID Disk Non-RAID Disk [hi]-Select [ESC]-Exit [ENTER]-Select Menu 8 2: RAID Level Recovery <Enter> 9 Intel(R) Rapid Storage Technology - Option ROM - 10. 0. 0. 1008 Copyright(C) 2003-10 Intel Corporation. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : Recovery Disks : Select Disks Strip Size : N/A Capacity : 0. 0 GB Sync : Continuous Create Volume [ HELP ] Recovery: Copies data between a master and a recovery disk. [hi]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select 9 - 86 - 3: <Enter> <Tab> <Space> <Enter> ( 10) Intel(R) Rapid Storage Technology - Option ROM - 10. 0. 0. 1008 Copyright(C) 2003-10 Intel Corporation. [ CREATE VOLUME MENU ] Name : Volume0 RAID Level : Recovery Disks : Select Disks [ SELECT DISKS ] Strip Size : 128KB Capacity : 223. 6 GB Port Drive Model Serial # Create Size Status Volume M0 ST3120026AS 3JT354CP 111. 7GB Non-RAID Disk ST3120026AS 3JT329JX 111. 7GB Non-RAID Disk R1 [ HELP ] Choose the RAID level: RAID0: Stripes data (performance). Select 1 Master RAID1: and 1 Recovery create volume. Recovery: Copies data between a master and a recovery disk. [. . . ] RAID10: Mirrors data and stripes the mirror. [hi]-Up/Down [SPACE]-Selects [ENTER]-Done [hi]-select [ESC]-Previous Menu [ENTER]-Select Yes 3 2 Intel Rapid Storage Technology Manage Volume Recover data Manage Status Normal - 99 - 4 Status Marvell 88SE9128 BIOS : eSATA3 RAID Configuration 1: BIOS eSATA3 RAID Configuration <Enter> Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. Topology HBA 0 : Marvell 0 Virtual Disks VD 0: New_VD HDD 1: WDC WD800JD-22L [Delete] Free Physical Disks [Rebuild] HDD 0: WDC WD800JD-22L Information ID Name Status Stripe Size RAID Mode Size BGA Status Number of PDs Numbers : : : : : : : : : 0 New_VD Degrade 64K RAID1 75776MB N/A 1 0 <Enter> RAID VD 0: New_VD Integrated Peripherals <Enter> Rebuild Help Rebuilding with selected physical disk on this array. ENTER: Operation F10: Exit/Save ESC: Return 2: <Space> <Y> <N> Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd. [. . . ]