ユーザーズガイド BOSE L1 COMPACT

[. . . ] L1® Compact Portable Line Array System Quick setup guide SAFETY INFORMATION Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this owner’s guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the system to rain or moisture. [. . . ] ¼-inch input – Balanced analog input for connecting guitars and other instruments. Accepts either ¼-inch TRS balanced or TS unbalanced cables. 3. Treble control – Adjusts the amount of treble on your microphone. 4. Bass control – Adjusts the amount bass on your microphone. 11. ToneMatch® switch – When connecting an 5. Microphone input – Analog input for acoustic guitar to the ¼-inch input, move the connecting a balanced XLR microphone cable. switch to the position to enable a A ToneMatch® microphone preset is built in. When connecting anything other than an acoustic guitar to the ¼-inch input, move the switch down to the Line Level position. Power LED – Indicates power status. Blue: Power on 6 OPERATING INFORMATION ¼-inch output RCA output Rear panel outputs ¼-inch output – Mono analog output that accepts either ¼ inch TRS balanced or TS unbalanced cables. Can be used to link multiple L1® Compact systems together by connecting the ¼-inch output from one L1® Compact system to the ¼-inch input (Channel 2) on a second L1® Compact system. This will provide additional coverage in larger spaces. You can also use the ¼-inch output to connect to a house PA system and use the L1® Compact system as your personal monitor. Note: Using a TS unbalanced cable will result in a drop in the audio level of -6dBu. TRS TS RCA output – Mono line level analog output for connecting audio devices such as CD recorders and flash recorders. For best results, connect both the left and right signals. Left Right Plugging in your sources Before plugging in a sound source, adjust the channel’s Volume control fully counterclockwise. 7 OPERATING INFORMATION Setting the Channel 1 (microphone) controls Channel 1 is only intended for use with a dynamic handheld microphone. Do not connect any other sources to this input. Before using the microphone, adjust the Channel 1 Volume control fully counterclockwise. While speaking into the microphone, adjust the Volume control to the desired level. For best results, keep the microphone close to your lips when speaking. Holding the microphone more than 3 inches (7. 6 cm) away from your lips when speaking will lead to less overall volume and may impact overall clarity. The Channel 1 Microphone Input is equipped with an integrated ToneMatch® preset to automatically optimize the sound of your microphone. Adjust the Treble and Bass controls to make further refinements based on your personal preference. Setting the Channel 2 controls When connecting an audio source to any of the Channel 2 inputs, follow these steps to adjust the volume. On the power stand, adjust the Channel 2 Volume control fully counterclockwise. [. . . ] 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]