ユーザーズガイド PANASONIC NV-A20

[. . . ] 2 Put the battery on the battery mount by aligning the mark, and then securely plug it in. Turning the camera on ª How to turn on the power 1 While pressing the button 1, set the [ ] (POWER) switch to [ ] (ON). 1 ≥ The Status indicator lights red and the power turns on. ≥ In Tape Recording Mode or Card Recording Mode, the lens cover opens. ≥ In Tape Recording Mode or Card Recording ] (POWER) switch to [ ] (ON) Mode, if the [ while the LCD monitor and viewfinder are closed, the power turns off and the lens cover closes. [. . . ] ª How to turn off the power 1 While pressing the button 1, set the [ ] (POWER) switch to [ ] (OFF). ª Charging lamp Lights up: Charging Goes off: Charging completed Flashing: The battery is over discharged (discharged excessively). In a while, the lamp will light up and normal charging will start. When the battery temperature is excessively high or low, the [CHARGE] lamp flashes and the charging time will be longer than normal. ª Fitting the battery Push the battery (or the DC input lead) against the battery holder and slide it until it clicks. 1 ≥ The Status indicator goes off when the power turns off. ª How to turn the power on and off with the LCD monitor/viewfinder. When the power switch is set to [ ] (POWER) switch to [ ] (ON), the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode or Card Recording Mode. 1 Close the LCD monitor and retract the viewfinder. ª Removing the battery While sliding the [BATT] lever, slide the battery (or the DC input lead) to remove it. ≥ The Status indicator automatically goes off and the power turns off. ≥ However the power does not turn off if the LCD monitor is closed and the viewfinder is retracted while recording on a tape. 2 Open the LCD monitor or extend the viewfinder to turn the power on and use the movie camera again. BATT ≥ Hold the battery with your hand so it does not fall. ≥ Before removing the battery, be sure to set the [ ] (POWER) switch to [ ] (OFF). ≥ The Status indicator lights red and the power turns on. Inserting/removing a cassette 1 Fit the AC adaptor or the battery and turn on the power. switch is set to [ 3) Tape playback mode 1 Fade Backlight compensation Help mode Soft skin mode Tele macro Colour night view/ 0 Lux colour night view 2 Recording check 4/4 1 Blank search ≥ 1 is displayed while recording on a tape. 2) Tape recording mode ] ([ (AUTO/MANUAL/FOCUS) switch is set to [ ] (MANUAL)) 2 1/4 3 1 2 2/4 1 3 3/4 3 Playback/pause 4 Stop 2 Rewind (review playback) 1 Fast forward (cue playback) 4) Card recording mode ] ([ (AUTO/MANUAL/FOCUS) switch is set to [ ] (AUTO)) 3 1/2 1 2 2 2/2 1 Backlight compensation Help mode Self-timer recording Soft skin mode Tele macro 5) Card recording mode ([ ] (AUTO/MANUAL/FOCUS) switch is set to [ ] (MANUAL)) Help mode Select an icon for an explanation of the function. 1 Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears. 1 3 1 1 Iris or gain value White balance Shutter speed Manual focus adjustment ] (When set to [ (FOCUS)) ≥ 1 is displayed only when the ([ ](AUTO/MANUAL/FOCUS) ] (FOCUS)). switch is set to [ 6) Card Playback Mode 2 3/3 3 1 2 4/4 1 2 Move the joystick right to select the Help mode icon [ ]. 3 4 2 1 Playback/stop Delete Playback previous picture Playback next picture ≥ The help mode explains the operation icons displayed when the ([ ] (AUTO/MANUAL/FOCUS) switch is set to [ ] (AUTO)) in Tape/Card Recording Mode. 3 Move the joystick up, left, or right to select the desired icon. Switching the language You can switch the language on the screen display or the menu screen. ≥ An explanation of the selected icon is displayed on the screen. ≥ Each time the joystick is moved down, the indication changes. ª To exit the Help mode Select [EXIT] or press the [ ] (MENU) button. [. . . ] ≥ Each time the joystick is moved down, the indication changes. ª To exit the Help mode Select [EXIT] or press the [ ] (MENU) button. ≥ When the Help mode is used, functions cannot be set. 2 Move the joystick up or down in order to select [ LANGUAGE] and then move the joystick right or press it to set the selection. 3 Move the joystick right to select [English]. 4 Press the joystick to determine the setting. Using the menu screen 1 Press the [ ] (MENU) button. ª To get back to the previous screen Move the joystick left. ª To exit the menu screen Press the [ ] (MENU) button. [. . . ]