ユーザーズガイド PANASONIC NV-GS300

[. . . ] ≥ If the DC input lead is connected to the AC adaptor, then the battery will not get charged. Remove the DC input lead from the AC adaptor. [. . . ] 2 Slide the [ ] (OPEN/ EJECT) lever and open the cassette cover. Inserting/removing a card Before inserting/removing a card, be sure to set the [ ](POWER) switch to [ ] (OFF). ≥ If the card is inserted or removed with the power turned on, this movie camera may malfunction or the data recorded on the card may be lost. ≥ Check that the Status indicator has gone off. 1 Open the card slot cover. ≥ When the cover is fully opened, the cassette holder will come out. 3 After the cassette holder is opened, insert/ remove the cassette. 2 Insert/remove the card into/from the card slot. ≥ When inserting a cassette, orient it as shown in the figure, and then securely insert it as far as it goes. ≥ When removing, pull it straight out. 4 Push the [PUSH] mark 1 in order to close the cassette holder. 1 1 PUSH ≥ When inserting a card, face the label side 1 towards you and push it straight in with one stroke as far as it goes. ≥ When removing the card, open the card slot cover and press the center of the card and then pull it straight out. 3 Securely close the card slot cover. 5 Only after the cassette holder is completely housed, close the cassette cover tightly. Selecting a mode Rotate the mode dial to select your favourite mode. ≥ Set your desired mode to 1. 1 PC : Tape recording mode Use this when you record the image on a tape. (Also, you can simultaneously record still pictures on a card while recording images on a tape. ) : Card recording mode Use this to record still pictures on a card. : Card playback mode Use this to play back the still pictures recorded on a card. : Tape playback mode Use this to play back a tape. : PC connection mode You can view or edit the images recorded on a card on your personal computer. How to use the joystick ª Basic joystick operations Operations on the menu screen and selection of files to be played back on the multi-image display Move the joystick up, down, left, or right to select an item or file, and then push in the center to set it. 5 5 5 5 1 2 1 2 1 1 2 1Select by moving up, down, left, or right. 2Determine by pushing the center. ª Joystick and screen display Push the centre of the joystick, and icons will be displayed on the screen. [. . . ] 1 Move the [s / r] (VOLUME) lever to adjust the volume. Zoom in/out function You can zoom in up to 10k optically. 1 Wide-angle recording (zoom out): Push the [W/T] lever towards [W]. [. . . ]