ユーザーズガイド PANASONIC VDR-D300

[. . . ] ≥ If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC cable from the AC adaptor. 1 Connect the AC cable to the AC adaptor and the AC outlet. [. . . ] 2 Put the battery on the battery mount by aligning the mark, and then securely plug it in. ∫ Fitting the battery Push the battery (or the DC cable) against the battery holder and slide it until it clicks. ∫ Removing the battery While sliding the BATTERY RELEASE lever, slide the battery (or the DC cable) to remove it. ∫ CHARGE lamp Lights up: Charging Goes off: Charging completed Flashing: The battery is over discharged (discharged excessively). In a while, the lamp will light up and normal charging will start. When the battery temperature is excessively high or low, the CHARGE lamp flashes and the charging time will be longer than normal. ≥ Hold the battery with your hand so it does not fall. ≥ Before removing the battery, be sure to set the [ ] (POWER) switch to [ ] (OFF). Quick guide (English) ∫ How to turn on/off the power ≥ When recording, remove the lens cap before turning the unit on. If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not function properly. While pressing the button A, set the [ ] (POWER) switch to [ ] (ON)/[ ] (OFF). Inserting/removing a disc When inserting or removing the disc, fit the charged battery pack or connect the AC adaptor to the unit. The cover of the disc compartment will not open unless the unit is powered. Card recording mode Use this to record still pictures on an SD card. Card playback mode Use this to play back still pictures on an SD card. Switching the language You can switch the language on the screen display or the menu screen. 1 Press the [ ] (MENU) button. 2 Move the joystick up or down in order to select [ LANGUAGE] and then move the joystick right or press it to set the selection. Quick guide (English) How to use the joystick This unit has a joystick for selecting functions, performing operations, etc. so it is easy to operate this unit with one hand. Disc playback mode ∫ Basic operations Operations on the menu screen and selection of scenes on the thumbnail view screen, etc. Move the joystick up, down, left, or right to select an item or scene, and then press the joystick to set it. 1/; ∫ : 2; Playback/pause Stop playback and show thumbnails Rewind, skip (during playback) Reverse slow/frame playback (during pause) 9 : Fast forward, skip (during playback) ;1 : Forward slow/frame playback (during pause) : : : : Card recording mode 1 2 Ø : Self-timer 1 Select by moving up, down, left, right. 2 Press the joystick to select the item. : Backlight compensation : Help mode : Soft skin mode : Tele macro (In manual mode) : White balance ∫ Joystick and screen display Press the center of the joystick, and icons will be displayed on the screen. [. . . ] : Backlight compensation : Help mode : Soft skin mode : Tele macro (In manual mode) : White balance ∫ Joystick and screen display Press the center of the joystick, and icons will be displayed on the screen. C ] (MENU) ≥ When the Help mode is used, functions cannot be set. C Current settings on menus Quick guide (English) 5 Move the joystick right or press the joystick. Recording ∫ Recording on a disc ≥ Rotate the mode dial to select . 6 Move the joystick up or down in order to select the desired item. 1 7 Press the joystick to enter the selection. Press the recording start/stop button to start recording. To get back to the previous screen Move the joystick left. To exit the menu screen Press the [ ] (MENU) button. 2 Press the recording start/stop button again to pause recording. Quick guide (English) ∫ Recording on an SD card ≥ Rotate the mode dial to select . ∫ Zoom in/zoom out function You can zoom in up to 20k optically. ≥ Rotate the mode dial to select Move the zoom lever. [. . . ]