ユーザーズガイド ROLAND BOLT-60

[. . . ] No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Read This First Use of the setup without the following may prevent the BOLT-60’s rim shots from sounding, cause double triggering, or result in other problems. 1. [. . . ] Adjust the “Rim Sensitivity” (*1: See below) If you find the following kinds of problems occurring, adjust the “Rim Sensitivity. ” • If you cannot get a rim sound even when you strike the rim hard, increase the “Rim Sens” value. • If you hear a rim sound when you strike the head, decrease the “Rim Sens” value. Example: Connect the BOLT-60 to the Trigger Input 2 (SNARE) on the TD-6V Trigger Parameter Trigger Basic (TRIG BASIC) Trigger Advanced (TRIG ADVNCD) Trigger Type (TrigTyp) Mask Time Rim Sens Value PD-80R 8ms 13 (8–15) (*1) How To Set the Trigger Parameters 1. Press [SHIFT] + [EDIT (SETUP)] on the TD-6V. Press [LEVEL/PAN] + [TEMPO] on the TD-3. [EDIT] flashes and “ ” appears in the display, then the trigger type value is indicated. Display Value 80r 8 12 (7–16) 1. 5 1 (*1) 2. Strike the BOLT-60. The SNARE trigger indicator lights. 3. Press [EDIT] to select the parameter (“ ”, “ 4. [. . . ] Press [DRUM KIT]; the [EDIT] light goes off. ”, “ ”, “ ”, etc. ). * Do not turn off the power without the [EDIT] light having gone out. [. . . ]