ユーザーズガイド ROLAND VC-300HD

[. . . ] 2. 3. 4. 5. © * 4 0 7 8 2 2 2 3 0 1 * VC-300HD 40782223 1N Features added to VC-300 HD/VC-200HD version 1. 02 Added Features Support for HDV/DV input/output from PC non-linear editing software Support for PC non-linear editing software has been added. HDV/DV signals can now be input/ output with respect to software such as Adobe Premier Pro or Apple Final Cut Pro 5. 0. Features added to VC-300 HD/VC-200HD version 1. 02 Changing the DVI-I INPUT Connector DDC Settings The DVI-I INPUT connector DDC settings can be changed with the following procedure. * The input format selection cannot be fixed. "AUTO" is shown for all displays. 1. [. . . ] The VC-300HD/ VC-200HD has three types of automatic setting items to support the various types of DVI input. Bug Fixes • Fixed the problem of the video occasionally being corrupted when output was set to 480i or 576i. • Fixed the problem of the audio on the Rch being one sample slower than the Lch. • Fixed the problem that caused the parameters of Menu 311 to Menu 460 to not be reflected on actual operations when turning on the power. • Fixed the problem that caused noise to appear on the left side of the screen with Component input. • Fixed the problem that occasionally caused a freeze when a non-supported signal was input to the DVI-A input. • Fixed the problem that caused the preceding and following field images to be output on image sections with intense brightness differences when the input signal was interlaced. • Revised so that the synchronizing signal is not embedded in the analog component output colordifference signal when 480i or 576i is set. (According to the standards, SD component does not have an embedded synchronizing signal. ) • Fixed the problem of video occasionally slipping one field between theinput and the output. 3. Press the VALUE/ENTER knob. Please wait as the VC-300HD/VC-200HD checks the connection status of the DVI-I connector. If the DVI cable is not properly connected, the VC-300HD/VC200HD Display shows "DVI IS NOT CONNECTED. " Please check the connection. Once properly connected, press VALUE/ENTER to check the DVI cable connection status again. 4. Turn the VALUE/ENTER knob to select a setting. The VC-300HD/VC-200HD display shows "SELECT REFRESH RATE. " Use the VALUE/ENTER knob to select the setting appropriate for the device being used. Support for PC non-linear editing software The status of support for PC non-linear editing software is as follows. Settings on the SELECT REFRESH RATE screen Initialize DDC settings that are set VESA Format 1080/59. 94i, 1080/50i VESA Format 1080/59. 94i, 1080/59. 94p, 720/59. 94p VESA Format 1080/50i, 1080/50p, 720/50p PC Non-linear Editing Software Apple Final Cut Pro Adobe Pemiere Pro 2. 0 Sony Vegas 7. 0 Avid Express Pro 5. 2 Canopus EDIUS 4. 0 pro HDV Capture yes *1 yes yes yes yes HDV Output yes yes yes yes yes DV Capture yes yes yes yes yes DV Output yes *2 yes *2 yes *2 yes *2 yes *2 • Apple Final Cut Pro is a trademark of Apple Computer Inc. • Adobe Premier Pro is a trademark of Adobe Systems Inc. • Sony Vegas is a trademark of the SONY Media Software company of the U. S. A. [. . . ] * The above table corresponds to VC-300HD/VC-200HD Version 1. 02. The most recent support information can be found on our website (http://www. rolandsystemsgroup. net/). Restart the VC-300HD/VC-200HD. After the VC-300HD/VC-200HD restarts, the DDC setting change is complete. Copyright © 2007 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. [. . . ]