ユーザーズガイド SHARP AD-AT10LS

[. . . ] A A A A A A A A A A A A A A A A A TINSZ1422AFZZ A0111. 2. 0MYM. YT ENGLISH INSTRUCTION MANUAL TABLE SPEAKER STAND MODEL AD-AT10LS Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. [. . . ] • Do not insert the plug end d of the speaker cable into the pipe. [Mounting other speakers 2 ] After removing the fitting e from the pipe A and leading the speaker cable c into the pipe A , attach the supplied speaker cushion F . • Lead the speaker cable along the groove on the holder f . • Keep the speaker screws (5 mm × 6 mm). 2 3 After connecting the cable to the speaker, fix the speaker with the speaker mounting screws G . For speaker connections, refer to the operation manuals of respective unit. 4 Adjust the height of the speaker. A quite heavy load will be applied to the bottom of the stand after the speaker is mounted on it. Make sure that the position it is placed is firm and strong enough to support it. Fasten the screws tight before placing or moving the speaker stand. Tighten the screws regularly as they may be loosened after mounting the speaker on it. If it is used with the screws loosened, the speaker may fall and cause injury or damage to people and the speaker itself. To adjust the height of the table speaker stand after positioning it, pay attention to cables not to break them. Clean the stand with soft cloth dampened with neutral detergent. Never use organic solvents such as benzene, thinner, etc. Notes: g g Specifications Load capacity: 1 kg or less Maximum outside dimensions: 180 mm (W) × 397 mm (H) × 180 mm (D) Weight: approx. 1. 2 kg Use this stand for recommended models only. Caution: Mount the speaker observing instructions in this manual. [. . . ] Do not place these stands on unstable surface or frame. They may fall over or fall off, causing injury or damage to people and the speaker. 9906_C SHARP CORPORATION Printed in Japan [. . . ]