ユーザーズガイド SHARP AD-AT11ST

[. . . ] [SD-AT100] TINSZ0217SJZZ 03C N AO 1 ENGLISH INSTRUCTION MANUAL FLOOR SPEAKER STAND MODEL AD-AT11ST Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. [. . . ] Fasten the screws tight before placing or moving the speaker stand. Tighten the screws regularly as they may be loosened after mounting the speaker on it. If used with the screws loosened, the speaker may fall and cause injury or damage to people and the speaker itself. For retightening the screw, refer to the figure on the right. To adjust the height of the speaker after positioning it, pay attention to cables not to break them. Clean the stand with soft cloth dampened with neutral detergent. Never use organic solvents such as benzine, thinner, etc. Notes: g Specifications g Load capacity: 1. 5 kg or less Maximum outside dimensions: 270 mm (W) 1, 100 mm (H) Weight: approx. 2. 5 kg Use this stand for recommended models only. Caution: Mount the speaker observing instructions in this manual. If it is not mounted properly, the stand may fall over and cause injury or damage to people and the speaker. [. . . ] Do not place these stands on unstable surface or frame. They may fall over or fall off, causing injury or damage to people and the speaker. 270 mm (D) SHARP CORPORATION 0302 Printed in China [. . . ]