ユーザーズガイド SHARP MD-ST77

[. . . ] BASS1 Slightly emphasized BASS2 More emphasized BASS3 Greatly emphasized BASS0 Cancellation of the emphasis A track that was recorded in the 2 times long recording or the 4 times long recording can be played in stereo. Even if tracks recorded in different modes are mixed, each track can be played in its own recording mode. CHARGING THE RECHARGEABLE BATTERY (pages 14-15) Charge the rechargeable battery according to the following procedure. (2) Insert the – mark of the battery first. (3) Close the battery compartment cover. [. . . ] If the MiniDisc is removed and then inserted, playback will start from the first track. OTHER PLAYBACK (pages 22-24) s To locate the beginning of a track To move to the beginning of the next track : Press the Press the button once during playback. button once during playback. s To check the total playing time When the MiniDisc is stopped, press the DISPLAY button on the remote control repeatedly. Disc name and total number of tracks q This Total playing time To move to the beginning of the track you are listening to : s To locate the desired portion To Fast forward audibly (Cue): During playback, continue to press the button. button. unit can display katakana characters which conform to the MD standard specifications. q If the track or the disc is not named, “NoNAME” is displayed. s To check the playing time of each track 1. When stopped, press the or button to select a track. Press the DISPLAY button on the remote control. q Once the playing time is displayed, you can select a track. To Fast reverse audibly (Review): During playback, continue to press the s Intro scan You can listen to the first 5 seconds of each track. button While in the stop mode or pause mode, hold down the on the remote control for 2 seconds or more. q To return to normal playback, press the button again. s To check service life of the battery When a rechargeable battery or the alkaline battery is used, its remaining amount is displayed. As the battery charge drops from use, the bars in the charge indicator will go out one by one. q When the battery is run down, “LoBATT” appears on the display and the power is turned off. q The battery remaining amount may not be displayed steadily until approximately 20 seconds after the power is turned on. q The remaining amount is not displayed if the unit is used on the battery charger. q The number of bars shown in the battery indicator may change depending on the operation being performed. q If you use a battery which you stopped charging halfway, “ ” may appear. It does not mean that the battery is completely charged. s Random play and repeat play During playback, press the button on the remote control repeatedly to select the play mode. RND RND Playback in random order Repetition of random order Repetition of all tracks 1 Repetition of a single track No display Playback in order CHECKING DISPLAYS (pages 25-26) s To check the elapsed playing time and remaining playing time During playback, press the DISPLAY button on the remote control repeatedly. Track number and track name Elapsed playing time Remaining playing time HOLD FUNCTION (page 27) To avoid operations by accidentally pressing the buttons, use the hold function. Remote Control Unit: To put the unit in the malfunction prevention state, move the switch in the direction of the arrow. switch to its original To cancel the HOLD mode, return the position. Main Unit: button for 2 seconds or more. Lime green and orange operation indicators will flash once. [. . . ] Align the protuberance on the battery case with the indentation on the side of the unit. Turn the fixing screw on the battery case toward the word "LOCK", and then make sure that the battery case does not move. q Do not insert a rechargeable battery (such as nickel-cadmium rechargeable battery) into the battery case. “LEDnor” Operation indicator Backlight on the remote control Display on the remote control “LEDall” Operation indicator Backlight on the remote control Display on the remote control “LEDopr” Operation indicator Backlight on the remote control Display on the remote control Indication lamp is flashing. (Lit when operated on the battery charger. ) Indicated Lit for approx. [. . . ]