ユーザーズガイド SONY D-NE1 annexe 1

[. . . ] 43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 English Locating the controls . . . . . . . . . . . . . . . . . . . . 50 Playback options . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 5 HOLD switch (rear) Slide the switch in the direction of the arrow to disable the buttons on the CD player. 6 F button Use to select a file, play mode, etc. 7 5-way control key u: play/pause . : AMS*2/rewind >: AMS/fast forward x/CHG: stop/charge DISPLAY/MENU: Use to select menu items and DISPLAY/ enter the selection. MENU Push the control key toward u, >, . or x/CHG with your finger on DISPLAY/MENU. 8 (group) + button 9 0 (group) – button qa EXT BATT (external battery)/ DC IN 4. 5 V (external power input) jack qs Terminals for the charging stand qd OPEN switch Slide the switch to open the CD player lid. *1 The button has a tactile dot. *2 Automatic Music Sensor Display (CD player) 1 Character information display While playing an audio CD, disc name, track name, etc. appear in 4 lines, if recorded on the CD. While playing an ATRAC CD/MP3 CD, group name, file name, etc. appear in 4 lines, if recorded on the CD. 2 Atrac3plus/MP3 indication 3 Disc indication Lights up while the CD player is playing. c Replace the batteries with new LR6 (size AA) alkaline batteries. c An AC power adaptor which is rated higher than the one supplied or recommended is being used. Use only the supplied AC power adaptor or the car battery cord recommended in “Optional accessories. ” c The CD is dirty or defective. c Check that the CD is inserted with the label side up. Leave the CD player aside for several hours until the moisture evaporates. c Close the lid of the battery compartment firmly. c Make sure the batteries are inserted correctly. c Connect the AC power adaptor to an AC outlet securely. c Press the jog lever (CD player: Push the 5-way control key toward u) after one second or more has passed since the AC power adaptor was connected. c There is a problem with the quality of the CD-R/RW, recording device, or application software. Slide the HOLD switch back. c AUDIO OUT is set to “LINE. ” Adjust the volume using the volume control on the connected device. [. . . ] (resume function) Rustling noise is heard from the CD. When using with a connected stereo system, the sound is distorted or noisy. During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. “NO FILE” appears on the display after you press the jog lever (CD player: after you push the 5- way control key toward u) or when the lid of the CD player is closed. [. . . ]