ユーザーズガイド SONY SPP-VC111

[. . . ] 3-222-218-03 (1) 10 19 30 SPP-VC111 © 2000 Sony Corporation /Operating Instructions 40 50 56 58 72 79 (77 86 94 ) Operating Instructions (English) P. 109 SPP-VC111 v 1 1 1 2 3 v 1 v • • v • 2 • 2 110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 10 18 1: 2: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • If you return the handset to the charger or press off after pressing intercom , a melody is heard from the base phone speaker. The call can be answered either on the base phone or on a handset. • If an intercom call is terminated on the base phone after step 3, you can resume the conversation on the handset. 3 Tell the person on the handset that you are switching phones. 4 Place the receiver on the base phone. If nobody answers Press intercom to resume conversation on the base phone. To switch from one handset to another (when using more than one handset) 1 Press intercom during a phone conversation. 2 Press the handset number. For example: To switch from handset 1 to handset 2, press 2 on handset 1. The phone is put on hold and a melody is heard. Tips • When using more than one handset, “ (all handsets)” and all the handset numbers are displayed. • You can switch phones after putting the call on hold by pressing hold/message transfer . • If you return the receiver to the base phone after pressing intercom , a melody is heard from the base phone speaker. The call can be answered either on the base phone or on a handset. • If an intercom call is terminated on the handset after step 3, you can resume the conversation on the base phone. 3 When the handset rings, pick up the handset from the charger or press talk when it is not on the charger. 4 Return the handset to the charger after switching. If nobody answers Press intercom or talk the handset. Tips • You can switch phones after putting the call on hold by pressing hold/erase . • On the switched handset, the handset number you are using is displayed. • When using more than one handset, the handset you are using displays the numbers of the base phone number (“0”) and the other handsets. Note The time counter displayed on the handset after switching from the base phone shows the duration of operation from the moment you started talking on the handset. to resume the conversation on To switch from the handset to the base phone 1 When using one handset: Press intercom during the phone conversation. When using more than one handset: Press intercom and 0 during a phone conversation. The phone is put on hold and a melody is heard. 2 When the base phone rings, pick up the receiver. You cannot use on-hook dialing. To talk between the handsets You can talk between two handsets like talking on walkie-talkies For example: calling from handset 1 to handset 2 1 Press intercom on handset 1. 2 When handset 2 rings, pick up the handset from the charger or press talk when it is not on the charger. 3 Keep pressing and talk on handset 1 after you hear the beep tone. 5 To talk on handset 2, keep pressing on handset 2 and talk. When you finish talking, release . 3 Tell the person on the base phone that you are switching phones. 4 Place the handset on the charger or press off . If nobody answers Press intercom or talk to resume the conversation on the handset. 114 Operating Instructions Talking between the phones (intercom) To talk from the base phone to the handset (when using one handset) 1 Base phone: Pick up the receiver and press intercom . The handset starts to ring. To talk from the handset to the base phone 1 When using one handset: Pick up the handset from the charger and press intercom . When using more than one handset: Pick up the handset from the charger, and press intercom and 0 . The base phone starts to ring. 2 Base phone: Pick up the receiver. 2 Handset: Pick up the handset from the charger or press talk . You can start talking between the handset and the base phone. [. . . ] qf Dialing keys qg button morning button Used to set a morning call. qh intercom button Used to make an intercom call. qj handset priority button This button also allows the handset to ring 4 times before the base phone starts to ring. qk flash/program button Used to answer an incoming call during a conversation and allows you to start various setting operations. ql Receive data indication Displayed when the receive data directory is used. [. . . ]