ユーザーズガイド SONY VAIO VGN-AR92S

[. . . ] The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). Attaching a Linear PCM Recorder !Notes • Fasten the screws securely using a coin or the like. • Attach the Linear PCM Recorder to the spacer plate by aligning projecting parts at the corners on the Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area). bottom of the Linear PCM Recorder with the hollows at the corners on the spacer plate, so that there is no gap between the Linear PCM Recorder and the spacer plate. • After attaching the Linear PCM Recorder securely, connect the microphone cable to the MIC jack of the Linear PCM Recorder.  Using the microphone adaptor attached side-by-side with the Linear PCM Recorder  Using the screw hole marked BASE PLATE, attach the spacer plate to the base plate with the screw provided.  Slide the microphone adaptor to the spacer plate.  Attach the Linear PCM Recorder to the base plate with the screw. Noise may be heard when the unit is placed near an AC power source, a fluorescent lamp or a mobile phone during recording. Noise may be recorded when an object, such as your finger, etc. , rubs or scratches the unit during recording. To clean the exterior, use a soft cloth slightly moistened in water. Do not use alcohol, benzine or thinner. On safety  On handling   On noise  MIC external power (Phantom power) DC 48 V ± 0. 5 V Battery life (continuous operation) Approx. 40 hours at 2 mA + 2 mA current supply (Measured at normal temperature using Sony alkaline batteries) Max. current supply 10 mA Power requirements (for MIC external power) Four LR6 (size AA) alkaline batteries (supplied) Power consumption 0. 15 W (when Sony C-357 condenser microphone is connected) Dimensions (l/w/h) (not incl. projecting parts) VAIO VGN-AR92S 132 × 71 × 39 mm (5 1/4 × 2 7/8 × 1 9/16 in. ) Base plate 130 × 150 × 10 mm (5 1/8 × 6 × 13/32 in. ) Mass VAIO VGN-AR92S 440 g (15. 6 oz) (incl. [. . . ] 40 hours at 2 mA + 2 mA current supply (Measured at normal temperature using Sony alkaline batteries) Max. current supply 10 mA Power requirements (for MIC external power) Four LR6 (size AA) alkaline batteries (supplied) Power consumption 0. 15 W (when Sony C-357 condenser microphone is connected) Dimensions (l/w/h) (not incl. projecting parts) VAIO VGN-AR92S 132 × 71 × 39 mm (5 1/4 × 2 7/8 × 1 9/16 in. ) Base plate 130 × 150 × 10 mm (5 1/8 × 6 × 13/32 in. ) Mass VAIO VGN-AR92S 440 g (15. 6 oz) (incl. [. . . ]