ユーザーズガイド SONY WS-IS10F

[. . . ] • Do not handle the products with excessive force during cleaning or maintenance. Do not place any object on the products. On Safety Products by Sony are designed with safety in mind. If the products are used incorrectly, however, it may result in a serious injury through fire, electric shock, the product toppling over, or the product dropping. Be sure to observe the precautions for safety to prevent such accidents. Prohibited • Do not put anything on the products. If you do so, the system may fall and cause injury or property damage. Do not lean or hang on the products. • Do not lean or hang on the products, as they may fall on you and cause serious injury. Prohibited 2GB Pay attention to the location. • Do not expose the products to rain Prohibited or moisture, or spill liquid of any kind on them. [. . . ] Doing so may cause a fire or electric shock. • Keep flammable objects or open flames (e. g. , candles) away from the products. • Do not install the products over or under an air conditioner. If the products are exposed to wind from the air conditioner for an extended period of time, or get wet by water leakage from the air conditioner, this may cause a fire, an electric shock, or malfunctions. ATTENTION If the following precautions are not observed, injury or property damage may occur. Do not install any equipment other than the specified product. • The WS-IS10F/WS-40SE1B/WS-46SE1B speaker attachment bracket is designed for use with the specified equipment only. If you install equipment other than that specified, it may fall or break, and cause injury. • Do not place anything hot directly on the products. The heat may cause discoloration or deformation of the products. Do not allow the cords to be pinched. • If the AC power cord (mains lead) Prohibited or connecting cords are pinched between the products and the wall, floor, or other object, or bent or twisted by force, the internal conductors may become exposed and cause a short circuit or an electrical break. This may cause a fire or an electric shock. • Do not step on the AC power cord (mains lead) or connecting cords when you carry the products. The cord may be damaged, and this may result in a fire or electric shock. Be sure to secure the TV Sound Bar System and TV. • Secure the TV Sound Bar System and TV firmly when installing them together. Doing it alone may result in an accident or injury. • Be sure to keep children away during the process. Be sure to install the products securely following the instructions. • Tighten the screws securely. If the TV Sound Bar System is not installed securely, it may fall and cause damage or injury. • Be careful not to pinch your fingers or hands when assembling the products. Notes on cleaning Clean with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as thinner, benzine or alcohol. If you have any questions or problems concerning this product, please consult your nearest Sony dealer. 4GB Unpacking Unpacking • Operating Instructions (this manual) • Compatible list (1) • Attachment bracket (A) – 32 A (For WS-IS10F) (1) • Cable clamp (F) (2) • Support belt (G) (1) – 40/46 A (For WS-40SE1B/WS-46SE1B) (1) • Screw for support belt (+PSW M4 × 10 mm) (H) (1) • Wood screw for support belt (M3. 8 × 20 mm) (I) (1) – 40/46 B (For WS-40SE1B/WS-46SE1B) (1) • Anchor bolt (J) (2) • Extension neck for TV stand (B) (1) • Screw for attachment bracket (+PSW M5 × 12 mm) (C) (2) • Screw for attachment bracket (Silver) (D) (2) • Screw for TV stand head (+PSW M5 × 20 mm) (E) (3) 5GB Setting Up You can use this speaker attachment bracket to install the TV Sound Bar System on the TV stand. Notes • This speaker attachment bracket is designed for use with the stand supplied with TV only. • This speaker attachment bracket cannot be used with the SU-FL71M/SU-FL71L floor stand. • If you want to hang the SA-32SE1/SA-40SE1/SA-46SE1 TV Sound Bar System, hang it directly on the wall. Installing the TV Sound Bar System on the TV stand 1 Remove the screws from the TV stand, then detach the TV from the TV stand. The screws at the TV stand 6GB 2 Remove the screws from the original neck, then detach the original neck from the TV stand. Setting Up Original neck 2 1 Stand base Screws for the stand • The 32 inch and 40 inch model: 2 screws • The 46 inch model: 3 screws 3 Install the extension neck for TV stand (B) to the TV stand using the screws removed in step 2. 1 B 1 2 2 The screw removed in step 2 B The screws removed in step 2 continued 7GB 4 Remove the screw on the rear cover of the TV Sound Bar System, then remove the rear cover. TV Sound Bar System Rear cover 5 Mount the attachment bracket (A) to the TV Sound Bar System with the screw for attachment bracket (+PSW M5 × 12 mm) (C). Check the engraving on the rear of the attachment bracket and use a suitable bracket for the TV. For details, refer to the supplied “Compatible list”. A C 8GB 6 Remove the screws from the rear of the TV. Be sure to place the TV on a soft thick cloth with the TV screen facing down to prevent damaging the surface of the LCD. Setting Up The screws at the rear of the TV Cloth 7 Mount the TV Sound Bar System to the TV with the screw for attachment bracket (Silver) (D). Be sure to fasten the screws to the screw holes pointed with mark. D Notes • After installation, the screw for attachment bracket (Silver) will protrude from the screw hole. • When carrying the TV Sound Bar System-installed TV, do not hold it by the TV Sound Bar System. [. . . ] Doing so may cause damage or injury. continued 9GB 8 Attach the TV to the TV stand. Match the screw protrusion to the notch on the TV stand. Note When attaching the TV to the TV stand, make sure to hold the TV instead of the TV Sound Bar System. 9 Secure the TV to the TV stand with the screw for TV stand head (+PSW M5 × 20 mm) (E). x3 E 10 After you have made all connections, you can use the cable clamp (F) to neatly secure the cables. Note As a protective measure, secure the TV. For details, see “Preventing the TV from toppling over”. 10GB Preventing the TV from toppling over As a protective measure, secure the TV. If you fail to do so, the TV may topple over resulting in serious injury. Warning To avoid injury, place the TV Sound Bar System-installed TV less than 25 cm from the wall, and firmly secure the TV to the wall. Notes • Be careful not to pinch your fingers when setting up the TV or rack. [. . . ]