ユーザーズガイド YAMAHA DI-10MII

[. . . ] Do not install the cards yourself. The connecting screw also functions as the ground. [. . . ] Set the input level in the range of –68 dB to +10 dB. You can install up to eight cards in the analog input box AI8. B CH2B CH2A CH1B CH1A SIGNAL B SIGNAL MIC/LINE INPUT CARD MODEL LMY2-ML ANALOG IN When the indicator is lit in orange, channel B is selected. When the indicator is turned off, channel A is selected. The green LED lights up at 34 dB before clipping. Input Terminals CH1A, CH1B CH2A, CH2B GAIN*** –68 dB +10 dB Actual Load Impedance 3 kΩ For Use With Nominal 50-600 Ω Mics & 600 Ω Lines Input Level Nominal –68 dB (309 µV)* +10 dB (2. 45 V)* Max. Before Clip –54 dB (1. 55 mV)* +24 dB (12. 3 V)* Connector XLR-3-31 type (Balanced)** * 0 dB is referenced to 0. 775 Vrms. Set the maximum output level in the range of +15 dB to +24 dB. You can install up to eight cards in the analog output box AO8. SIGNAL CH4 CH3 CH2 CH1 SIGNAL DA CARD MODEL LMY4-DA SIGNAL SIGNAL ANALOG OUT 4 3 2 1 +24dB The green LED lights up at 34 dB before clipping. +18dB +15dB +1 5d B +1 8d B +2 4d B Output Terminals GAIN switch +24 dB Actual Source Impedance For Use With Nominal Output Level Nominal +10 dB (2. 45 V)* Max. Before Clip +24 dB (12. 3 V)* +18 dB (6. 16 V)* +15 dB (4. 36 V)* Connector CH 1-4 +18 dB +15 dB 150 Ω 600 Ω Lines +4 dB (1. 23 V)* +1 dB (870 mV)* XLR-3-32 type (Balanced)** * 0 dB is referenced to 0. 775 Vrms. ** 1=GND, 2=HOT, 3=COLD DA Conversion: 24 bit linear +3 bit floating, 128 times oversampling. For European Model Purchaser/User Information specified in EN55103-1 and EN55103-2. [. . . ] ** 1=GND, 2=HOT, 3=COLD DA Conversion: 24 bit linear +3 bit floating, 128 times oversampling. For European Model Purchaser/User Information specified in EN55103-1 and EN55103-2. [. . . ]